GReddy Profec - Unit; Alarm

UNIT
ConfigurethedisplayboostunitsineitherkPAorPSI.
SETUP
UNIT
■Programming■
ALARM
2
100kPa=1.01972kg/cm=14.5PSI
Configurethealarmsoundsofwarningandlimiter.
SETUP
ALARM
■Programming■
SET
SET
Configurations
(1)InthemainSETUPscreen,rotatetheSETDIALto
highlightUNIT.ThenpresstheSETDIALtoconfirm.
(2)RotatetheSETDIALtohighlightandselectkPaorPSI.
PresstheSETDIALtoconfirm.
*Tocancelandreturntotheprevioussettingandthe
mainSETUPscreen,pressMODE.
(1)InthemainSETUPscreen,rotatetheSETDIALto
highlightALARM.ThenpresstheSETDIALtoconfirm.
(2)RotatetheSETDIALtohighlightandselectanAlarm
pattern.PresstheSETDIALtoconfirm.
*Tocancelandreturntotheprevioussettingandthe
mainSETUPscreen,pressMODE.
Alarmoff:NoSound
Alarm1:BeepBeep,BeepBeep
Alarm2:Beep,Beep,Beep,Beep
Alarm3:Beep---------------------