GReddy Profec - Core Boost Adjustments

■ProgrammingtheBoostPressure■
SET
SET
SET
SET
Changestheboostpressurebycontrollingtheboostcontrolsolenoidvalve.
ThisSETvalueinpercentage(%)adjuststheboostcontrolsolenoidvalvedutycycle,
itdoesnotsetanactualboostpressurevalue.
・AstheSET%valueisincreasedbetween0-100%,itincreasestheboostlevelover
theturbochargerʼ sbasewastegateboostlevel.
・100%valuewillincreasetheboostleveloftheturbochargersystemsmaximum
capacity.
・0%valuewillbethebaseboostlevelturbochargersystem(boostcannotbeset
belowthebaseboostlevel).
(1)InaBOOSTmodesetupscreen,highlightSETand
presstheSETDIALtoconfirm.
(3)ToprogramtheSET%value,presstheSETDIALto
confirmandreturntotheBOOSTmodesetupscreen.
*Refertopage38forSETshortcuts.
(2)RotatetheSETDIALtochangeaSET%value.
Tocancelandreturntotheprevioussettingandthe
BOOSTmodeset-upscreen,pressMODE.
Boostsettings
Modeʼssetupscreen
Modeʼssetupscreen
Important
・Theremaybevehiclesorturbochargerset-upswhichareunabletoreach
yourtargetboostpressure.