DC INVERTER MULTI VRF INSTALLATION
136
Water condensatation, water drop
Air leak from ceiling
Air leak
Fig.5
2. If gap still exist between ceiling and decoration panel after tightening
the screws, readjust the height of the indoor unit. (As shown in fig.6)
If the raising lever and drain hose are
not affect, can adjust the height of
indoor unit by the hole on the corner
of panel.
Gaps are not allowed
Fig.6
※ After fixing, be sure no gap left between the ceiling and the panel.
3. Wiring of the decoration panel (Fig.7)
☆ Connect the joints for swing flap motor lead wire (at 2 places) installed on the panel.
At body At pane
At paneAt body
Fig.7
To Next Page
Loading...
