Gree DC Inverter Multi VRF

DC INVERTER MULTI VRF MAINTENANCE
206
Removal and Installation of Oil Separator
Step Illustration Handling Instruction
1. Disconnect the oil
separator from the
connection pipe
●Loosen the three joints on oil
separator sub-assembly by
welding; then, pull out the
connection pipe.
Note: During welding, take
care not to let the flame burn
other elements.
2 Loosen the screws fixing
the oil separator
●
Use screwdriver to loosen
the screws fixing the oil
separator.
3. Remove the oil separator
and replace it
●
Remove the oil separator
and replace it
4．Tighten the screws fixing
the oil separator
●
Use screwdriver to tighten
the screws fixing the oil
separator.
5. Weld the oil separator to
the connection pipe
●
Weld the three joints on oil
separator sub-assembly.
Note: During welding, take
care not to let the flame burn
other elements.