Gree DC Inverter Multi VRF

DC INVERTER MULTI VRF MAINTENANCE
208
Removal and Installation of Liquid Tank
Step Illustration Handling Instruction
1. Disconnect the liquid tank
from connection pip
● Disconnect the liquid
tank from connection pip
Note: During welding, take
care not to let the flame
burn other elements.
2. Loosen the bolts fixing
the liquid tank
●
Use spanner to loosen
the bolts fixing the liquid
tank.
3. Remove the liquid tank
and replace it.
●
Remove the liquid tank
and replace it.
4 Tighten the bolts fixing the
liquid tank
●
Use spanner to tighten
the bolts fixing the liquid
tank.
5. Weld the liquid tank to
connection pipe
●
Weld the two joints on
liquid tank; then, connect
the pipe properly.
Weld the two joints on
liquid tank; then, connect
the pipe properly.