Gree FLEXX Series Service Manual

GREE DC INVERTER HEAT PUMP CONDENSING UNIT
92
Model: FLEXX60HP230V1AO
Removal of fan and motor
NOTE: Before removing the fan, make sure power is cut off.
Step
Picture
Work instruction
1. Remove the grill.
 Use a screwdriver to
unscrew the two screws on
the upper left and lower
right corners.
2. Remove the fan.
 Use a wrench to remove the
specialized nut and gasket
of the fan.
NOTE: Please keep the nut
and gasket safe after
removing them from the fan.
3. Remove motor.
 Use a screwdriver to
unscrew the bolt of motor.
NOTE: Motor wire should
be first removed from the
electric box.

Gree FLEXX Series Specifications

General

Type	Heat Pump
Series	FLEXX
SEER	Up to 20
HSPF	Up to 10
Refrigerant	R410A
Heating Operation Range	-22°F to 75°F
Cooling Operation Range	5°F to 122°F
Operating Temperature Range (Heating)	-22°F to 75°F
Operating Temperature Range (Cooling)	5°F to 122°F
Energy Efficiency Ratio (EER)	Up to 12.5
Dimensions (Outdoor Unit)	Varies by model
Weight (Outdoor Unit)	Varies by model
Compressor Type	Inverter
Power Supply	208/230V, 1Ph, 60Hz
Noise Level	As low as 55 dB(A)