Wired Controler XK60
41
Fig.20 SE setting (1)
Notes:
①
Under the Auto mode, when the “SAVE” function is activated, the unit will
forcibly quit the Auto mode and change to the current operation mode.
Further, the “Sleep” function will be deactivated when the “SAVE” function
is activated.
②
During the “SAVE” setting, if the Function button is pressed down or there
is not any operation within 5s after the last button operation, the system will
quit the “SAVE” setting with the current setting data not saved.
③
The “SAVE” function setting will be memorized in case of power failure.
To Next Page
Loading...
