G36p
Oxygen Analyzer
Version 2.11 – Revision March 2022 5
1 Introduction
1.1 About this Manual
This manual contains data and instructions for the installation, operation, and mainte-
nance of the G36p Oxygen Analyzer.
The instructions have been made in general terms and do not take into consideration a
specific installation. The instructions & figures have been made in general terms and do
not take into consideration specific installations. The figures used in the manual are only
for general illustration purposes. As such, the instruction manual is designed only for the
G36p Oxygen Analyzer.
The instructions for the installation, operation, and maintenance of the complete analyz-
ing system including sampling board designed for the G36 Oxygen Analyzer by Green
Instruments A/S are provided in a separate manual.
This manual does not describe all possible situations but only the most common and
known situations and cannot replace the necessary education of the personnel. Should
situations not described in the manual occur which cannot be solved in accordance with
normal known practice and good workmanship, the operator should contact Green In-
struments A/S for instructions.
Before operation read all instructions and warnings within this manual and
associated documentation. Improper use may cause personal injury and/or damage
of equipment and may void the warranty.
Green Instruments A/S disclaims any responsibility for damage and/or injury
caused by improper installation, use or maintenance of the equipment.
Green Instruments A/S reserves the right to minor alterations and improvements owing to
developments without being obliged to enter the corresponding changes in this manual.
Green Instruments A/S reserves the copyright of the manual. Without prior written per-
mission of Green Instruments A/S, the manual may not be copied and given to unauthor-
ized people.
To Next Page
Loading...
