1.2 Inquiries and Feedback
All claims and inquiries for spares shall be addressed to Green Instruments A/S or our
distributors.
In all correspondence or when ordering spare parts, please carefully state the equipment
type and serial number which can be found on the label on the back of the analyzer.
Green Instruments A/S appreciates all feedback and suggestions for improvement. If any
questions appear or any discrepancies can be found in the manual, kindly contact Green
Instruments:
Green Instruments A/S
Erhvervsparken 29
DK-9700 Brønderslev
Denmark
Phone: + 45 9645 4500
Fax: +45 9645 4501
E-mail: service@greeninstruments.com
Web: www.greeninstruments.com
1.3 About the Analyzer
The G36p Oxygen Analyzer continuously measures the content of oxygen with concen-
trations up to 21.0 %. The analyzer can be used to measure the content of oxygen in N2
or CO2 based inert gas, or in stack gas, or in connection with exhaust gas recirculation
(EGR). The G36p Oxygen Analyzer is designed for front panel mounting.
The G36p Oxygen Analyzer uses a zirconia sensor. The zirconium dioxide sensors have
long been established as industry standards. The G36p uses a new type of zirconia sensor,
which can be used in a wide range of applications.
To Next Page
Loading...
