Greenlee Textron / Subsidiary of Textron Inc.
16
1990 Dieless Hydraulic Crimping Tool
Retrofit Kits
Crimping Tool Purchase
Explanation
Part Repair Kit
Relief valve cap (87) 36150 Repair kit includes cap, cover, nut and screw (87, 90, 92, 93).
or cover (90)
36149 Failure of either pin will overstress the other components, requiring
complete replacement of the crimping head.
Repair kit includes pins, YM-type fixed die and cylinder
(23, 24, 28, 33). This kit is compatible with WH-style tools also.
The pins, dies and cylinder are not individually interchangeable
between the WH and YM series.
Whenever the cylinder is serviced, replacement of the following
is recommended: wiper, guide, O-ring and backup ring
(34, 35, 36, 37).
Cylinder cap (42) or 36153 Requires complete rebuild. Repair kit includes a YM-style pump
pump block (46) block and all related components, as follows:
(29–32, 40–55, 57, 58, 60, 62, 64, 65, 67, 69, 70, 77, 79,
82, 87, 90, 92–94)
Pump handle 36152 Repair kit includes the following:
assembly (with grip) (2–5, 7–11, 14, 15, 103)
This kit includes a pressure release rod (3) and pressure release bar
(8). When installing this YM-type kit onto a WH-type tool, you must
retain the WH-type pressure release rod (3) and pressure release
bar (8). They are not interchangeable.
The grips are not interchangeable. When replacing either handle
assembly, you might consider replacing both of them so that two
grips are similar in appearance.
Reservoir handle 36151 Repair kit includes grip and handle (1, 18).
assembly (with grip)
The grips are not interchangeable. When replacing either handle
assembly, you might consider replacing both of them so that two
grips are similar in appearance.
Many components are interchangeable between the
older (WH) and current (YM) crimping tools. However,
some components are not interchangeable, requiring
the replacement of several components at once.
Use this table to select the appropriate repair kit.
Crimping head
components or
cylinder (33)
To Next Page
Loading...
