Greenlee Textron / Subsidiary of Textron Inc.
3
1990 Dieless Hydraulic Crimping Tool
IMPORTANT SAFETY INFORMATION
Electric shock hazard:
This tool is not insulated. When
using this unit near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning can
result in severe injury or death.
Skin injection hazard:
Oil under pressure easily punctures
skin causing serious injury, gan-
grene or death. If you are injured by
escaping oil, seek medical attention
immediately.
• Do not use hands to check for
leaks.
• Depressurize the hydraulic
system before servicing.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.
Pinch points:
Keep hands away from closing dies.
• This tool is intended for two-
handed operation. Maintain a firm
grip on both handles during
operation. Using this tool in any
other manner can result in injury
or property damage.
• Do not operate the tool without
dies in place. Damage to the ram
or crimping head may result.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in severe
injury or death.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
SAFETY
ALERT
SYMBOL
To Next Page
Loading...
