WARNING:
Risk of electric shock:
•
Do not operate the charging station if it is physically damaged or if the charging cable has
cracks, excessive wear, or other visible damage. Contact Gresgying or your distributor if
you suspect that the charging station is damaged.
•
Do not direct powerful jets of water toward or onto the charging station. Never operate it
with wet hands. Do not put the EV charging plug into any liquid.
•
Do not place fingers or other objects inside the charging port or plug port.
•
Read the user instructions supplied with your Gresgying charging station and the User
Manual for your electric vehicle before charging.
•
Make sure that the charging cable cannot become damaged (kinked, jammed, or driven
over) and that the plug(s) do not come into contact with heat sources, dirt, or water.
•
When the cable is connected on the charging station, do not leave the cable lying around
on the floor.
Connect the circuit breakers Q3 and Q4 of the front cabinet door of the charging system,
and close the front door and the left and right doors;
After 2S, the system will automatically pull in the AC input contactor after the system
self-check is normal, and the power module is electrified.
9. Use of the Gresgying F2-EU
The charger can be used by ordinary people (no special qualification or training is
needed).
The owner of the charging station shall provide to the customer with all the procedure,
security and warning related information.
9.1 Start Charging
Take off the connector and connect it to the vehicle.
Click on “Available”to confirm the the vehicle is connected to the charging point.
To Next Page
Loading...