Greyline Instruments SLT32 - Page 9

From VolHrt or Flow presstomakeyourselection.(Range or Level modewillbypassthe
Volumeunitsselectionmenu). VolHrt or Flow modeswillgiveyoutheadditionalchoiceof
volumetricunits:
ft3 - cubicfeet
USG - USgallons
USMG - USmilliongallons(FLOW only)
IG - Imperialgallons
IMG - Imperialmilliongallons(FLOW only)
m3 - cubicmeters
L - liters
Press Æ topositionthecursorunderneathyourselectionandpress È tomakeyourselection.
V
ol or Hrt modeswillalsopromptyoutoenteramaximumvolume.Press È from MxVol toposition
thecursorunderthefirstdigit.Use È or Ç tochangethedigitsordecimalpointtoentertheactual
maximumvolumeyouwillbemeasuring.Press Æ toreturnto MxVol and È .
Youcanentervaluesupto6digits(e.g.150,000liters).Whenthemeasuredtankvolumeexceeds4
digits,theSLT32willautomaticallydisplaya‘multiplier’ontheloweralphanumericdisplay.
FLOW modewilloffertheadditionalselectionoftimeunits:
s - seconds
min - minutes
hr - hours
d - day
Note:TheSLT32willdisplay Er:ILLEGALUNITS ifyourchoiceofUnitsexceedsamaximumvalue
of9,999,999.Use USMGD, ImpMGD or m3/d sothatUnitswillbe9,999,999orless.Press È to
S
tore and Æ to Yes.Thenpress È or Ç tostoreallyour UNITS/MODE selections.
SLT32Level&FlowMonitor
ManualSeriesB.11
Page 9
UNITS 1000L
= 150,0 00 Liters