Model G0803Z (Mfd. Since 12/18)
-39-
SECTION 6: MAINTENANCE
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Loose mounting bolts.
• Damaged saw blade.
•
Worn or damaged wires.
•
Any other unsafe condition.
Monthly
• Check belt for tension, damage, or wear.
• Remove blade and thoroughly clean all built-
up sawdust from the rubber tires on the
wheels.
• Clean/vacuum dust buildup from inside cabi-
net and off motor.
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning &
Lubricating
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If
resin has built up, use a resin dissolving cleaner
to remove it.
Once a month, remove the blade and thoroughly
clean all built-up sawdust from the rubber tires on
the wheels.
If the table becomes difficult to tilt, lubricate the
trunnion gear and the slide in the trunnion base.
To Next Page
Loading...
Need help?
General
