-54-
Model G0803Z (Mfd. Since 12/18)
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
200 P0803Z200 MODEL NUMBER LABEL 206 P0803Z206 GRIZZLY.COM LABEL
201 P0803Z201 DO NOT OPEN DOOR LABEL 207 P0803Z207 READ MANUAL LABEL
202 P0803Z202 DO NOT LOOK INTO LASER LABEL 208 P0803Z208 ELECTRICITY LABEL-SMALL
203 P0803Z203 DISCONNECT 110V POWER LABEL 209 P0803Z209 ELECTRICITY LABEL-MEDIUM
204 P0803Z204 RESPIRATORY/GLASSES LABEL 210 P0803Z210 TOUCH-UP PAINT GREY PUTTY
205 P0803Z205 MACHINE ID LABEL 211 P0803Z211 TOUCH-UP PAINT GRIZZLY GREEN
grizzly.com
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Specifications
Motor: 1/3 HP (320W), 120V, 60 Hz
Full-Load Amp Draw: 2.8A
Blade Speed: 2460 FPM
Standard Blade Length: 62"
Blade Length Range: 61-13/16"–62-3/16"
Blade Width Range: 1/8"–3/8"
Max. Cutting Width Left of Blade: 9"
Max. Cutting Height: 3-5/8"
Table Size: 12" x 12"
Table Tilt: 0˚L ⁄ 45˚R
Weight: 42 lbs.
MODEL G0803Z
9" BENCHTOP BANDSAW
Date
S/N
Mfd. for Grizzly in China
WARNING!
To reduce risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Never touch moving blade—keep hands out of blade path.
3. Always wear approved eye protection and respirator.
4. Only plug power cord into a grounded outlet.
5. Only remove jammed cutoff pieces when blade is stopped.
6. Use push stick or holding jig to cut small or narrow pieces.
7. Disconnect power before changing blades or adjusting saw.
8. Maintain adjustment of blade tension, tracking, & guides.
9. Keep upper guide adjusted to just clear the workpiece.
10. Hold workpiece firmly against table to maintain control.
11. Only run saw with wheel covers closed and all guards in place.
12. Never reach under table while blade is in motion.
13. Secure/remove loose clothing and long hair.
14. DO NOT expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
DO NOT look directly into the laser.
Serious eye damage will occur.
201
202
203
INJURY HAZARD!
Do not open door
while machine is
connected to power
or blade is in motion.
204
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
201
205
206
207
208
209
210
211
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
To Next Page
Loading...
