-12-
Model G0938 (Mfd. Since 03/21)
SECTION 3: SETUP
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
• Additional Person (for lifting) ...................... 1
• Safety Glasses (for each person) ........1 Pair
• Level ........................................................... 1
• Dust Collection System .............................. 1
• Dust Hose 1
1
⁄2" ........................................... 1
• Hose Clamps 1
1
⁄2" ...................................... 2
• Disposable Shop Rags ............... As Needed
• Phillips Head Screwdriver #2 ..................... 1
• Flat Head Screwdriver
1
⁄4" ........................... 1
• Open-End Wrench 13mm ........................... 1
• Rubber Mallet ............................................. 1
• Shop Vacuum (Optional) ............................ 1
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged
call us immediately at (570) 546-9663.
Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
This machine and its com-
ponents are very heavy.
Get lifting help if needed.
To Next Page
Loading...
Need help?
General
