Before starting the lathe, make sure you
have performed the preceding assembly
and adjustment instructions, and you have
read through the rest of the manual and
are familiar with the various functions and
safety features on this machine. Failure to
follow this warning could result in serious
personal injury or even death!
Test Run
TroubleshootingPage 53
To test run the machine:
1.
2.
LubricationPage 47
3.
Figure 15
Chuck & Faceplate Mounting/Removal
Page 22
Check Gearbox Oil
LubricationPage
47
GEARBOXES MUST
BE FILLED WITH OIL!
NO OIL SHIPPED WITH
MACHINE!
Requires ISO 68
or Non-Detergent
SAE 20W Motor Oil.
Figure 15.
4.
5.
Figure 16
Figure 16.
To Next Page
