Grizzly G9249 - LATHE ASSEMBLY & PLACEMENT; Assembly Steps


 
Floor Load
Machine Data SheetPage 4 
      
     
     

Placement Location
     

       

Figure 7

Children and visitors may be
seriously injured if unsuper-
vised around this machine.
Lock entrances to the shop
or disable start switch or
power connection to prevent
unsupervised use.
Site Considerations
-*
)(
Figure 7.
Lathe Assembly &
Placement
The Model G9249 is a
heavy machine. Serious
personal injury may occur
if safe moving methods are
not used. Get assistance
and use power equipment
(rated for at least 1500
lbs.) to move the ship-
ping crate and remove the
machine from the crate.
To assemble and move the lathe:
1. 

2.       

       
Figure 8
Figure 8.


3.       


