D. Feed Direction Lever:
E. Feed Rod/Leadscrew Lever:
F. Feed Rate Selectors:
Carriage Controls
Figure 19
Figure 19.
A. Cross Slide Handwheel:
B. Compound Slide Handwheel:
C. Thread Dial:
D. Half-Nut Lever:
E. Spindle Direction Lever:
F. Feed change lever:
G. Carriage Handwheel:
Tailstock Controls
Figure 20
Figure 20.
Quill Lock:
Tailstock Lock:
Quill Handwheel:
Note: The graduated dial has marks in
0.001" increments on the upper portion of the dial
and marks in 0.02mm increments on the lower
portion.
To Next Page
