SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Daily Check:
Page 51
Before Beginning Operation & Every 8 Hours
of Operation:
•
• Pages
47–48
Page 48
Page 50
Every 40 Hours of Operation:
Page 49
• Page 50
After First 3 Months of Operation and
Annually:
• Page 47
Schedule
Cleaning &
Protecting
DO NOT use compressed air to blow away
chips from the lathe to avoid the risk of
flying metal debris injuring yourself or oth-
ers, or driving the chips deep into the lathe
mechanisms resulting in damage or prema-
ture wear.
ACCESSORIESPage 42
To Next Page
