-6-
Model T31739 (Mfd. Since 11/19)
The information contained herein is deemed accurate as of 3/4/2020 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 2
Model T31739
Spindle Information
Distance From Spindle to Base........................................................................................................... 20-1/4 in.
Quill Diameter....................................................................................................................................... 1.575 in.
Table Information
Max. Table Tilt (Left/Right)..................................................................................................................... 45 deg.
Table Swing.......................................................................................................................................... 360 deg.
Table Swivel Around Center................................................................................................................. 360 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Table Length.......................................................................................................................................... 9-5/8 in.
Table Width........................................................................................................................................... 9-5/8 in.
Table Thickness........................................................................................................................................... 1 in.
Vertical Table Travel.................................................................................................................................. 10 in.
Number of T-Slots............................................................................................................................................ 4
T-Slot Size................................................................................................................................................ 1/2 in.
T-Slot Centers.............................................................................................................................................. 3 in.
Floor-To-Table Height.............................................................................................................. 8-7/8 - 18-7/8 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Column....................................................................................................................................................... Steel
Spindle Housing................................................................................................................................... Cast Iron
Head.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Paint Type/Finish....................................................................................................................... Powder Coated
Other Related Information
Base Length........................................................................................................................................ 16-1/4 in.
Base Width............................................................................................................................................ 9-5/8 in.
Column Diameter................................................................................................................................... 2-3/8 in.
Depth Stop Type............................................................................................ Threaded Rod with Positive Stop
Has Work Light............................................................................................................................................. Yes
Light Socket Type...................................................................................................................... 3.5V, LED Bulb
Maximum Bulb Wattage............................................................................................................................... 1 W
Other Specifications:
Country of Origin ................................................................................................................................................ China
Warranty ........................................................................................................................................................... 1 Year
Approximate Assembly & Setup Time ........................................................................................................ 45 Minutes
Serial Number Location .................................................................................................................................. ID Label
ISO 9001 Factory .................................................................................................................................................. Yes
Features:
Adjustable Laser Sight
Four 1/2" T-Slots
Variable-Speed Spindle Control from 400 - 2700 RPM
Precision-Ground Cast-Iron Table w/7-1/4" Extension
LED Worklight
Spindle Speed Digital Readout
Depth Stop 0-90mm w/Quick-Release
Rack & Pinion Table Elevation Control
Accessories Included:
Hex Wrenches 3, 4, 5mm
Drift Key
To Next Page
Loading...
Need help?
General
