Growatt SPH6000 User Manual

discharging
power
Type of Battery lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
lithium
/Lead-acid
Efficiency
Max. efficiency 97.2% 97.2% 97.3% 97.4% 97.5% 97.6%
Euro weighted
efficiency
97% 97% 97.1% 97.1% 97.2% 97.2%
MPPT efficiency
≥99.5% ≥99.5% ≥99.5% ≥99.5% ≥99.5% ≥99.5%
Protection devices
Safety level Class Il
Overvoltage
category
PV:II AC:III Others:I
Ingress
protection
IP65
Inverter topology Non-isolated
Operating
temperature
range
–25°C ... +60°C (-13...+140℉) with derating above 45°C /113℉
Safety level Class I
Ingress
protection
IP65
DC switch Integrated
DC
reverse-polarity
protection
Integrated
DC Surge
protection
Type II
Insulation
resistance
monitoring
Integrated
AC surge
protection
Type II
AC short-circuit
protection
Integrated
Ground fault
monitoring
Integrated
Grid monitoring Integrated
Anti-islanding
protection
Integrated(Active Frequency Drift)
Residual-current
monitoring unit
Integrated
General Data

Growatt SPH6000 Specifications

General

Model	SPH6000
Category	Inverter
Rated Power	6000 W
Max. DC Voltage	550 V
Max. Output Current	27.3 A
Start Voltage	150 V
Nominal DC Voltage	360V
Number of DC Inputs	2
Number of MPP Trackers	2
Nominal AC Power	6000 W
Max. AC Power	6600 W
Nominal Grid Frequency	50 Hz / 60 Hz
Total Harmonic Distortion	<3%
DC Switch	Yes
Protection Class	IP65
Operating Temperature Range	-25°C to +60°C
Max. Output Power	6600 W
Output Voltage	230V
Output Frequency	50/60 Hz
Nominal AC Voltage	230V
AC Voltage Range	180V-280V
Power Factor	0.8 leading - 0.8 lagging
Communication	RS485
Cooling Method	Natural Convection