Grundfos TPE3 - Menu overview for advanced control panel

21
English (US)
13.2 Menu overview for advanced control panel
13.2.1 Main menus
Home TPE3 (D) TPE2 (D)
●●
Status TPE3 (D) TPE2 (D)
Operating status ●●
Operating mode, from ●●
Control mode ●●
Pump performance ●●
Actual controlled value ●●
Max. curve and duty point ● -
Resulting setpoint ●●
Liquid temperature ● -
Speed ●●
Acc. flow and specific energy ●●
Power and energy consumption ●●
Measured values ●●
Analog input 1 ●●
Analog input 2 ●●
Analog input 3 ●
1)
●
1)
Pt100/1000 input 1 ●
1)
●
1)
Pt100/1000 input 2 ●
1)
●
1)
Analog output ●
1)
●
1)
Warning and alarm ●●
Actual warning or alarm ●●
Warning log ●●
Alarm log ●●
Heat energy meter ● -
Heat power ● -
Heat energy ● -
Flow rate ● -
Volume ● -
Hours counter ● -
Temperature 1 ● -
Temperature 2 ● -
Differential temp. ● -
Operating log ●●
Operating hours ●●
Trend data ● -
Fitted modules ●●
Date and time --
Product identification ●●
Motor bearing monitoring ●●
Multi-pump system ●●
System operating status ●●
System performance ●●
System input power and energy ●●
Pump 1, multi-pump sys. ●●
Pump 2, multi-pump sys. ●●
Pump 3, multi-pump sys. ●●
1)
Only available if an advanced functional module is fitted.