23
English (US)
14. Grundfos GO Remote
The pump is designed for wireless radio or infrared
communication with the Grundfos GO Remote.
The Grundfos GO Remote enables setting of functions and gives
access to status overviews, technical product information and
actual operating parameters.
The Grundfos GO Remote offers the following mobile
interfaces (MI). See fig. 33.
Fig. 33 Grundfos GO Remote communicating with the pump
via radio or infrared connection (IR)
14.1 Communication
When the Grundfos GO Remote communicates with the pump,
the indicator light in the middle of the Grundfos Eye will flash
green. See section 21. Grundfos Eye.
Communication must be established using one of these
communication types:
• radio communication
• infrared communication.
14.1.1 Radio communication
Radio communication can take place at distances up to
30 meters. It is necessary to enable communication by
pressing or on the pump control panel.
14.1.2 Infrared communication
When communicating via infrared light, the Grundfos GO Remote
must be pointed at the pump control panel.
TM06 0744 0914
Pos. Description
1
Grundfos MI 202:
Add-on module which can be used in conjunction with an
Apple iPhone or iPod with 30-pin connector and iOS 5.0
or later, e.g. fourth generation iPhone or iPod.
2
Grundfos MI 204:
Add-on module which can be used in conjunction with an
Apple iPhone or iPod with Lightning connector, e.g. fifth
generation iPhone or iPod.
(The MI 204 is also available together with an Apple iPod
touch and a cover.)
3
Grundfos MI 301:
Separate module enabling radio or infrared
communication. The module can be used in conjunction
with an Android or iOS-based smart device with
Bluetooth connection.
To Next Page
Loading...
