Listening to an external source
You can listen to the audio signal from the ex-
ternal device connected through your system’s
speakers.
1 Switch on the device from standby mode
by pressing »8« on the remote control or
»ON/OFF« on the device.
2 Use a standard audio cable (not supplied)
to connect »AUX IN« on the back of the de-
vice to an AUDIO OUT socket on the external
equipment.
3 Press »M« repeatedly on the remote control or
»MODE« on the device until »Aux in« appears
in the display.
4 Start playback on the external device.
To Next Page
Loading...
Need help?
General