WARNING: Do not use your eBike if the brakes have not been correctly tted and ad-
justed. If in doubt have them checked by an experienced mechanic or bike shop.
If the brake cable is too tight the cable guide will not locate into the cable holder. The
brake cable will need adjusting and follow the instructions for adjusting the brake
cable on page 25.
Push the black rubber cable cover across, so
that it is ush against the cable holder.
Check the brake cable is located in 3 positions:
1. Into the cable guide
2. The cable guide is slotted into the cable holder
3. The brake cable is in the brake lever adjuster
barrel.
2
3
1
To Next Page
Loading...