Turn the black adjustment nut anti-clockwise and
remove it from the front wheel quick release lever.
Keep the adjustment nut safe.
Remove the spring that was closest to the
adjustment nut and keep it safe.
Push the quick-release through the centre of the
front wheel.
Place the frame upside down on a at surface,
resting the saddle and handlebars on the oor.
You may need to put something down on the
surface to stop your bike frame from getting
scratched.
Make sure that the 2 black plastic wheel protectors have been removed from the wheel. Be careful
when removing these, so they do not snap off and become stuck in the wheel. Remove the front fork
spacer.
How to t the front wheel
To Next Page
Loading...