Place the frame upside down on a at surface,
resting on the saddle and the handlebars.
You may need to put something down on the
surface to stop your bike frame from getting
scratched. Pull the quick-release lever on the
front wheel, so that it is fully open.
Remove the wheel.
Detach your brakes, which are located at the
top of the front forks, from the front wheel rim
by closing the brake arms using your thumb and
index nger and lifting out the brake cable. If
there is not enough play, loosen the adjusters at
the handlebars.
Loosen the adjustment nut by turning
it anti-clockwise approximately 5 full rotations.
Removing the front wheel
To Next Page
Loading...