Gtech EB01 - Attaching the Reflectors

30
Assembly
Attaching the reectors
The clear reector faces to the front of the eBike and is tted to the handlebar.
Use a Philips head screwdriver to turn the screw
anti-clockwise to remove. Retain the nut.
Clip the reector to the handlebar. Locate the
nut and insert the screw and turn clockwise to
secure the reector in place
Clip the reector to the seat post. Insert the
screw and turn clockwise to secure the reector
in place.
Take the rear (red) reector and remove the screw
as per the front reector.
Removing screw from rear reector Reector being screwed onto seat post