Charging the battery
When the lights rapidly cycle red, recharge
the battery.
Alternatively, you can remove the battery from
your eBike. Plug the charger into a mains power
socket, then remove the rubber charging point
cover and connect the charger to the battery.
After 3 hours the LEDs turn green and charging
is complete.
1. You can charge the battery while it is still
attached to your eBike.
2. Plug the charger into a mains power socket,
then remove the rubber charging point cover and
connect the charger to the battery.
3
hours
2
1
To Next Page
Loading...