EasyManua.ls Logo

Gtech eSCENT - Attaching and Removing Battery

Gtech eSCENT
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Preparation
Sit the battery in the base of the battery cradle,
located on the down tube. Make sure that the
green power button is facing outwards, away
from the down tube.
Push the battery rmly down towards the frame.
It will click when it is in place.
Attaching the battery
To remove the battery, squeeze the green trigger,
then pull the carry handle to release the battery
from the cradle.
Pull the battery away from the frame to remove it.
Removing the battery

Related product manuals