Splitting and replacing the chain
Locate the master link in the chain. The master
link is different to all the other links as it has black
pins rather than chrome.
Insert the master link pliers into the master link. Squeeze in the handles. This will detach the
master link and it can now be removed.
Make sure you read the safety instructions for the chain under Important Safeguards
(see pages 2-3) before you start to replace or clean the chain.
In the unlikely event of the chain becoming damaged or heavily worn and in need of replacement.
You may need to use a pair of MLP 1.2 Master Link Pliers:
Adjust the saddle so that it is at its lowest
position. Turn the bike upside down and place
on a soft surface.
To Next Page
Loading...
