Ready for your rst journey? Before you go out adventuring check that the following steps have been
completed in accordance with the instructions in the assembly section. We want to ensure you get the
most out of your new eBike and by following the list below you will be ready to get out there
with condence.
Operation
Before you start riding, check that:
1. The wheels are mounted properly.
Yes.
2. The brakes work properly.
3. The seat post is at the correct height.
4. The saddle is comfortable.
5. The chain is correctly tted.
6. The forks are adjusted correctly.
7. The air pressure in the tyres is correct.
8. The battery is attached.
10. The handlebar screws are tightened.
9. The battery is charged.
Charging the battery ..................................................................... 17
Turning on your eBike ................................................................... 18
USB Port ...................................................................................... 20
Gear controls ................................................................................ 21
Using your gears to maximise your range ..................................... 21
Cable lock .................................................................................... 22
Brake controls .............................................................................. 24
To Next Page
Loading...
