Charging battery
When the LCD display reads 0, you will need to
recharge your battery.
The LCD display will display that it is charging.
You will need to remove the battery from your
eBike to charge it. Plug the charger into the wall,
then sit the battery on the charge base with the
cable exiting from the rear.
After 3 hours the battery will be fully charged.
Always fully charge your battery before storing. For optimum performance,
we recommend that you store the battery indoors during the winter months.
It is important that you charge the battery according to the instructions located
on the charger.
The LCD indicates the percentage of remaining capacity.
To Next Page
Loading...
