Replacing the inner tube
Remove the wheel from your bike and then
remove the dust cap from the tyre valve.
1. Squeeze the tyre away from the rim to unhook
the bead and push a tyre lever in underneath
the bead.
2. Push the tyre lever upwards to pull the bead
over the wheel rim.
Push the Gtech tool into the tyre valve to
let out the air.
You may need to push down on the tyre to help
remove the air, whilst still pushing down on the
tyre valve.
You will need a 27.5 x 2.35 compatible inner tube. You will also nd it easier if you have a tyre lever
handy. These can be purchased from good bike shops. If changing the tyre at the same time, you will
need a 27.5 x 2.35 tyre.
1
2
To Next Page
Loading...
