Adjusting the saddle height
Pull back the quick-release lever. Adjust the saddle to the correct height for you,
making sure that the minimum mark is not
above the seat tube.
Close the quick-release by rmly pushing on the
quick-release lever, so that it lies at against
the frame.
Check that the saddle cannot move once the
quick-release is closed. If it does move, tighten
the adjusting nut, until you need to use the palm
of your hand to close the quick-release lever.
When adjusting the height of the saddle ensure that the quick release clamp is sufciently tightened so
that there is no movement in the seat post.
To Next Page
Loading...
