Gear Controls
1. To go up a gear push the front lever once.
You will hear one click.
2. To go up two gears at a time, push the front
lever harder. You will hear two clicks
To go down a gear push the back lever once.
1
2
The eBike is designed to enhance your ride by making it easier to climb hills and travel at speed on at
roads. Gtech recommend using all 10 gears to extend your range.
It is best to be in the highest gear (small cog) when riding on the at and the lowest gear (largest cog)
when climbing.
If used in the correct gear, the pedal should have consistent resistance. It should feel like the rider and
motor are equally contributing to the movement.
Using the gears to maximise your range
x1
x1
x2
To Next Page
Loading...
