Guspro BB-8416884 - General Description; Specifications; Ordering Information

TWO WAY - NORMALLY CLOSED
V710 Valve Body
Pipe Sizes 3/4” to 3” NPT, 4” Flange
*(
V710
SERIES
General Description
These 2 way normally closed globe
type valve bodies are designed
for on/off or proportional control of
commercial or industrial gas burners.
The V710 is designed exclusively for
use with the AH Hydramotor actuator.
The AH Hydramotor valve consists of
two assemblies; the valve body and the
AH Hydramotor actuator.
The V710 is a Push-to-Open valve
which opens when the valve stem
is depressed by an AH Hydramotor
actuator. An internal return spring
closes the valve when the Hydramotor
actuator is de-energized.
Approvals:
^
@
!
#
Series V710 Valve Body
with AH Hydramotor
Specifications
* 1” W. C. Drop @ 2” W. C. Inlet Pressure, 1,000 Btu/Cu. Ft or more, 0.64 Spec. Grav. Gas
NORMALLY CLOSED (Closed when released)
Pipe
Size
(ins.)
Operating
Pressure
Differential
(psi)
Min. Max.
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
0
0
0
0
0
0
0
0
15
15
15
15
10
10
10
15
V710EAS
V710FAS
V710GAS
V710HAS
V710JAS
V710KAS
V710LAS
V710NCF
Installation:
V710 valve body mounts in any
position directly
to the AH2
Hydramotor actuator.
File # MP932, Vol.17, Sec. 3;
Safety Valves
Report # L2105011;
Automatic Safety Shut-off Valves
Report # L2105011;
Automatic Valves
JI 3000606
Gas Safety Shut-off Valves
Valve Parts in Contact
with Fluid:
Body -
3
/
4
” to 3” NPT -
Die-cast
aluminum
4” Flange - cas
t iron
Bonnet -
Die-cast aluminum
Seals - Nitrile
Springs - Zinc-plated music wire
Stem Bushing - Delrin
Valve Stem - 303 s.s.
Retaining Pin - 303 s.s.
Retainting Ring - 17-7 s.s.
Pipe Plugs - Zinc-plated steel
Seal Ring - Teflon (models
with overtravrel)
Closeoff Pressure: 25 psi maximum
Ordering Information:
Important: Order by Catalog
Number .
e.g. V710EASV22
Model Types:
Quick Opening Trim: (Standard)
For applications where metered flow
control is not required.
Quick Opening w/Valve Seal
Overtravel Trim: (Suffix V22)
For any “ on-off “ application
where the user, code or approval
agency requires a valve seal
overtravel arrangement.
Linear Trim: (Suffix V15)
For applications that require flow
control, such as slow opening, low fire
turn down, or proportional control.
Linear w/Valve Seal
Overtravel Trim: (Suffix V25)
For applications where both
valve seal overtravel and flow
control are required. (Not available
in 4” pipe sizes.)
Specifications:
Pressure Taps: two 1/4” NPT
downstream, two 1/4” NPT upstream.
Fluid: Fuel Gas
V710EASV22
V710FASV22
V710GASV22
V710HASV22
V710JASV22
V710KASV22
V710LASV22
V710NCFV22
V710 Valve with AH hydramotor.
Linear
Trim
V710EASV25
V710FASV25
V710GASV25
V710HASV25
V710JASV25
V710KASV25
V710LASV25
N/A
V710EASV15
V710FASV15
V710GASV15
V710HASV15
V710JASV15
V710KASV15
V710LASV15
V710NCFV15
Minimum
Cv
Flow
Factor
Minimum
Gas
Capacity*
Btu/hr
12
17
25
30
64
75
92
180
665,000
960,000
1,406,000
1,717,000
3,620,000
4,250,000
5,230,000
10,200,000
Fluid & Ambient
Temperature
o
F
Min. Max.
-40
-40
-40
-40
-40
-40
-40
-40
150
150
150
150
150
150
150
150
Quick
Opening
Trim
Quick
Opening
w/Valve Seal
Overtravel
Trim
Catalog Numbers
Linear
w/Valve
Seal
Ovetravel
Trim