GVA GVA32DLED - Scheduled Recording via EPG

39
PVR (Personal Video Recorder)
Timer/Schedule recording
1. In DTV mode, go to the channel that will broadcast the program you want to record.
2. Press the EPG button on your remote control to bring up the EPG interface. The channel
you are watching will be highlighted on the screen that appears.
3. You now have two options for scheduling a recording.
a) To record at a specic program displayed in the EPG:
Use the arrow buttons to highlight the specic show you wish to record, then press the
RED button on the remote control. Choose the appropriate recording mode Once, Every
day, Weekly (AUST ONLY, NZ jump to b).
b) To record at a specic time:
Press the RED button on the remote control. Choose the appropriate recording mode
Once, Every day, Weekly. Then enter the program details on the recorder menu by
pressing / to select an item and </> to change the setting. For example, if the
program starts at 8:30 pm on the same day, enter: 30 in the space for MINUTES, 20
in the space for HOURS (a 24 hour clock applies), and then the relevant date. Use the
same method for entering the nish time.
4. Press OK to conrm your selection. A schedule of all your recordings (the reminder list) will
appear.
5. You may now press the power button to switch the TV to stand-by. It will record your
selection automatically.
NOTE: If you turn on the TV while it is in the middle of a scheduled recording, you will not be
able to switch the TV back into standby mode without end the recording rst.
Recorded List
You can access your recorded programs using the following two options.
• In DTV mode, press the INDEX button to display a list of your recorded programs. Use the
arrow buttons to select the desired recording and press the OK button to play it.
• Press the MEDIA button (or press SOURCE then select MEDIA), select ‘Movie, then follow
the instructions on page 36 to select and view your recordings.