13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input socket on the set using the RCA cable. Match
the sockets’ colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in red.
Select YPbPr input source using the SOURCE button on the remote control.
Basic Installation (Cont.)
AV Connection
Connect the VIDEO and AUDIO output socket of the DVD or VCR to the AV IN socket on the
set using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connec tion
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
13
YPbPr Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the TV. The picture quality
is improved compared to connecting a regular VCR to the video input. Connect the Audio
output of the DVD or VCR to the Audio input sockets on the set using the RCA cable
(3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb is blue, Pr is red. Audio
left is white and Audio right in red. Select YPbP input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
AV Connec tion
Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the
TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV
input source using the SOURCE button on the remote control.
To Next Page
Loading...
