SYSTEM & FIRMWARE
141
Prior to update, please rename the
downloaded firmware files as below:
Master file: M_IMAGE.bin
Slave file: S_IMAGE.bin
1. Press the F5 (Enter) key or Knob key first,
the qualified firmware version will show then.
Note: If flash drive has no update files, it
will show as the figure below.
2. Press the NEXT key or scroll Knob key to
move to the Update followed by pressing the
F5 (Enter) key or Knob key to Start update.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
