MENU SETTING
153
Calibration Setting
This section mainly provides several calibrations for
frequency, DC gain and DMM. Note that only the certified
technician can operate the calibration procedure. Refer to
the qualified personnel for more details when necessary.
1. Press the Menu key, the System
configuration menu appears. And
press the NEXT key repeatedly or
scroll the Knob key to move to the
Cali&Update - Calibration field.
2. Press the F5 (Enter) key or
Knob key to enter the
Calibration menu.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
