REMOTE CONTROL
233
3. Press the F5 (Enter) key or
Knob key to select the DHCP
ON option.
Configure Ethernet IP
The GDM-906X supports manually setting of the IP
addresses, including the subnet mask, gateway, DNS1 and
DNS2.
The IP Address Setup can only be edited if DHCP is off.
1. Press the Menu key, and then
the Page Down key repeatedly
until the Lan Setup
configuration menu appears.
2. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the IP Address
Setup – IP Address field.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
