GW Instek GDM-9060 - Set the EOL Character; Set the Flowctrl Handshake; Set the Separation Character

REMOTE CONTROL
223
Set the FlowCtrl handshake
Description
The FlowCtrl configuration menu can set the handshake
for return messages.
Set the EOL Character
Description
The TX TERM configuration menu can set the EOL
(end-of-line) character for return messages.
The EOL characters that can be received from the PC
include CR+LF, LF+CR, CR or LF. The most common
EOL character is CR+LF.
NOTE
The USBTMC, GPIB and LAN’s EOL character is fixed
with LF.
EOL
CR+LF, LF+CR, CR, LF (default = CR+LF)
Set the Separation Character
Description
The TX TERM configuration menu can set the
separation character for multiple return measurement
values.
NOTE
The USBTMC, GPIB and LAN’s separation character is
fixed with comma.
w ww. . com
information@itm.com1.800.561.8187