REMOTE CONTROL
235
7. Use the Left/Right keys to
move the cursor followed by
scrolling Knob key or pressing
+/- keys to define Subnet.
Also, you can press Number
keys to directly input a specific
digit.
8. Press the F5 (Enter) key or
Knob key again to confirm the
input digit for S1. And the
cursor will automatically jump
to next groups.
9. Repeat steps 7 to 8 for S2, S3 and S4.
The Subnet is divided in 4 groups; S1:S2:S3:S4.
10. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the IP Address
Setup – Gateway field.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
