GOM-802 User Manual
40
Count units 30~30,000
Press ENTER to confirm.
7. The Ready
Display appears
Note
After the Ready indicator is shown it is not
possible to make any changes to the compare
function or range.
8. Start the scan.
Press the MANUAL TRIG
INT
key to
start the sweep measurements.
The results will be displayed on
screen and output through the scan
port until finished.
9. View Results
Press the Up and Down arrow keys
to cycle through each result. The
measurement number will be
displayed on the Normal display and
the measurement on the main
screen.
10. Exit Scan
mode
Press SHIFT + NORMAL
SCAN
at
any time to exit the scan mode.
To Next Page
Loading...
