GW Instek GPP-3323 User Manual

GPP Series User Manual
160
Description
When enabling the invert function, invert the target
waveform in instrument first, and build timer
parameter. Invert function is available for Sine,
Pulse and Ramp templets only.
Example
:SEQUence2:TEMPlet:INVErt ON
Enable the invert function of active selected templet
for CH2.
Command
:SEQUence[1|2]:TEMPlet:INVErt?
Function
Queries whether the invert function under the
active selected templet is enabled.
Example
:SEQUence2:TEMPlet:INVErt?
Returns to the templet of CH2 to check if the invert
function is ON or OFF.
Command
:SEQUence[1|2]:TEMPlet:MAXValue{<value>|MI
Nimum|MAXimum}
Function
Sets the maximum voltage or current value of the
active selected templet.
Description
When voltage is the object to edit, it is the
maximum voltage to be set. When current is the
object to edit, it is the maximum current to be set.
When templet type is Pulse, the command is to set
low level value.
Example
:SEQUence2:TEMPlet:MAXValue 5
Sets the CH2 maximum voltage of the active
selected templet as 5V
Command
:SEQUence[1|2]:TEMPlet:MAXValue?
Function
Queries the maximum voltage or current value of
the active selected templet.

GW Instek GPP-3323 Specifications

General

Brand	GW Instek
Model	GPP-3323
Category	Power Supply
Language	English