GW Instek GPP-3323 - Page 163

REMOTE CONTROL
163
Command
:SEQUence[1|2]:TEMPlet:SELect
{SINE|PULSE|RAMP|UP|DN|UPDN|RISE|FAL
L}
Function
Selects templet type.
Description
SINE|PULSE|RAMP|UP|DN|UPDN|RISE|FAL
L
Example
:SEQUence2:TEMPlet:SELect SINE
Sets the selected templet type as SINE for CH2.
Command
:SEQUence[1|2]:TEMPlet:SELect?
Function
Queries the actively selected templet type.
Example
:SEQUence2:TEMPlet:SELect?
Returns the actively selected templet type for CH2.
Command
:SEQUence[1|2]:TEMPlet:SYMMetry <value>
Function
Sets the symmetry of RAMP.
Description
<value> Ranges from 0 to 100.
Example
:SEQUence2:TEMPlet:SYMMetry 50
Sets the symmetry of RAMP as 50% for CH2.
Command
:SEQUence[1|2]:TEMPlet:SYMMetry?
Function
Queries the symmetry of the actively set RAMP.
Example
:SEQUence2:TEMPlet:SYMMetry?
Returns the symmetry of the actively set RAMP for
CH2.
Command
:SEQUence[1|2]:TEMPlet:WIDTh <value>
Function
Sets the pulse width of Pulse.