GW Instek PSP-2010 - Page 52

REMOTE CONTROL
51
SP
Command
Description
The SP command sets the power limit. When the
power limit is changed the current limit will be
automatically altered to suit.
Syntax
SP <parameter> <CR>
ASCII
53 50<parameter> 0D
HEX
Parameter
<parameter>
Description
xxx
Power limit value( 3 characters, no
decimal)
Example
SP 100<CR>
Sets the power limit to 100W.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com