GW Instek PSU 60-25 - Setting Normal Function Settings; Special Function

PSU Series User Manual
112
Trigger Output
Pulse Width
Trigger output pulse width. A setting of 0 will
output the active level.
F120
0 ~ 60ms. 0 = output active level
Trigger Output
Level
Sets the active level of the output trigger if the
trigger output pulse width (F120) = 0.
F121
0 = LOW
1 = HIGH
Trigger Source
Sets the trigger source.
F122
0 = None
1 = Switching the output on/ off
2 = Changing a setting
3 = Recalling a memory
Special Function
Special Function
The special function setting is used to access
calibration, firmware updates and other special
functions. The special function setting has a
password that is used to access the special function
menu. The password used determines which
function is accessed. Please see your distributor for
details.
F-00
0000 ~ 9999
Setting Normal Function Settings
The Normal Function settings, F-01~F-61, F-70~F-
78, F-88~F-89 and F100~F122 can be easily
configured with the Function key.
 Ensure the load is not connected.
 Ensure the output is off.
 Function settings F-90~98 can only be viewed.